- Stock status: Available to Order – Backorder
Pay in 3 interest-free payments of
TEST.
Professional 10m Drain & Pipe Cleaning Hose for M22 Pressure Washer Systems
- 10m pipe cleaning hose – Provides extended reach for professional drain and pipe cleaning applications.
- Direct gun connection – Remove the lance and screw the M22 hose connection directly onto the trigger gun.
- M22 connection – Designed for compatible pressure washer guns using the conventional M22 threaded system.
- DN6 hose – Compact high-pressure hose suitable for working through pipes and drains.
- 250 bar rating – Suitable for compatible professional pressure washers operating up to 250 bar.
- Classic HD compatibility – Compatible with confirmed Kärcher Classic HD pressure washer models listed below.
- K/Part construction – UK-manufactured using a genuine Kärcher patented connection and quality hose.
Compatible Kärcher Professional Pressure Washers
- HD 4/8 Classic – 1.520-977.0
- HD 4/10 X Classic – 1.520-978.0
- HD 6/15 G Classic – 1.187-010.0
- HD 7/20 G Classic – 1.187-011.0
- HD 8/23 G Classic – 1.187-012.0
- HD 9/25 G Classic – 1.187-013.0
Why should I buy a Karcher K/Part M22 Pipe Cleaning Hose DN6 250 Bar 10m?
This 10 metre K/Part hose provides a practical pipe and drain cleaning solution for compatible Kärcher pressure washers with an M22 trigger gun connection. Fitting is straightforward: remove the normal spray lance from the trigger gun and screw the M22 connection of the pipe cleaning hose directly onto the gun. Its DN6 construction allows it to work through restricted pipework, while the 250 bar pressure rating makes it suitable for demanding professional applications.
Typical Applications
- Professional pipe and drain cleaning
- Clearing suitable blocked and restricted pipework
- Cleaning deposits from drainage pipes
- Maintenance of commercial and industrial drainage systems
- Pipe cleaning with legacy Kärcher Professional M22 pressure washers
- Drain cleaning with compatible Kärcher Classic HD pressure washers
Product Details
The Karcher K/Part M22 Pipe Cleaning Hose 6.391-478.0 is a 10 metre DN6 high-pressure hose designed for professional pipe, drain and sewer cleaning using compatible Kärcher pressure washers with an M22 threaded trigger gun connection. Rated to a maximum working pressure of 250 bar, it is suitable for legacy Kärcher Professional M22 machines and compatible Kärcher Classic HD pressure washers.
The M22 connection on the pipe cleaning hose screws directly onto the pressure washer trigger gun. To fit the hose, first remove the spray lance from the trigger gun and then screw the M22 connection of the pipe cleaning hose directly onto the gun in its place. The pipe cleaning hose is therefore used instead of the normal spray lance during pipe and drain cleaning.
The 10 metre pipe cleaning hose provides the reach required to work into drains, pipes and other restricted passages when used with a suitable pipe cleaning nozzle. High-pressure water is delivered through the DN6 hose to the nozzle, where the appropriate rear-facing water jets can provide the propulsion required to draw the hose through the pipe while helping to dislodge deposits and blockages.
This K/Part hose is compatible with the Kärcher HD 4/8 Classic, HD 4/10 X Classic, HD 6/15 G Classic, HD 7/20 G Classic, HD 8/23 G Classic and HD 9/25 G Classic, together with suitable legacy Kärcher Professional pressure washers using the appropriate M22 trigger gun connection. Always check the trigger gun connection and maximum working pressure before ordering.
K/Part accessories are UK-manufactured professional accessories incorporating genuine Kärcher patented connections with high-quality third-party hose. They provide a high-quality alternative to a complete Kärcher-manufactured hose while retaining the correct Kärcher connection.